Tilt-Lock SE82X

Installing your frameless glass pool fencing securely and efficiently is straightforward with the TILT-LOCK SE82X concealed mounting spigot system. Follow these easy steps for a smooth installation.

Tools and Materials Needed

• Chalk line
• Measuring tape
• Diamond core drill (14mm)
• Hammer drill (14mm)
• Cleaning equipment
• Chemset adhesive
• 12mm threaded rods
• 17mm socket wrench
• TILT-LOCK SE82X spigot kit (nuts, washers, rotating plates, plastics, grub screws)

Installation Steps

Step 1: Mark the Fence Line

• Use a chalk line to clearly mark the centre line of your desired fence location.
• Accurately mark glass panel widths and desired gap sizes along the chalked line
• Mark spigot location 20% in from the edge of each panel

Step 2: Drilling Holes

• Use a 14mm diamond core drill to begin each hole, ensuring clean entry into the surface.
• Complete the holes using a 14mm hammer drill to ensure sufficient depth and secure fixing.

Step 3: Securing Threaded Rods

• Thoroughly clean each hole to remove debris and dust.
• Use chemset adhesive to securely fix the 12mm threaded rods into each drilled hole, allowing them to cure as per adhesive manufacturer’s guidelines.
• Allow spigots to protrude 20mm out of the finished floor level

Step 4: Mounting Spigots

• Place each spigot onto the secured threaded rods.
• Secure each spigot firmly using the supplied nut and washer, tightening with a 17mm socket wrench.

Step 5: Installing Rotating Plates and Plastics

• Fit the rotating plates into each spigot, ensuring they move smoothly.
• Select and insert the appropriate plastic inserts according to your glass panel thickness for a snug fit.

Step 6: Glass Panel Installation

• Carefully position the glass panels into the spigots.
• Tilt each panel to your desired level position.
• Lock the glass securely in place by tightening the grub screws provided in your kit.

Final Check

Confirm all panels are securely fixed, level, and correctly aligned. Your frameless glass pool fence installation, using our TILT-LOCK SE82X concealed mounting spigot system, is now complete.